Blog
Truck border filing deadlines: US and Canada
By Noam Turecki ·
A truck headed into the US needs its cargo data with Customs and Border Protection (CBP) no later than 30 minutes or 1 hour before it reaches the first US port of arrival, or a lesser time if one is authorized for the CBP-approved system used to send it. A truck headed into Canada needs the data filed at least 1 hour before it arrives. Filing 1 hour ahead meets both stated minimums.
The US text is eCFR, 19 CFR 123.92, Electronic information for truck cargo required in advance of arrival, up to date as of 29 October 2026. The Canadian text is the Reporting of Imported Goods Regulations, current to 30 September 2026.
If your team does office work around loads, logistics automation is a page to read next. Plymouth AI Lab describes it as software doing repetitive office work such as entering orders, sending updates, requesting quotes and filing documents, built on the WMS, TMS and inbox a team already uses, with a person approving anything that leaves the building.
US trucks: 30 minutes or 1 hour, or a lesser time the approved system allows
The US rule gives two clock times. CBP must receive the cargo information no later than either 30 minutes or 1 hour before the truck reaches the first port of arrival in the United States.
The rule also allows such lesser time as authorized, based on the CBP-approved system used to present the information. So a lesser time can apply, based on the system your filing goes through, and the rule text doesn't hand you one figure for every truck.
The data goes to CBP electronically. The regulation says CBP must electronically receive certain information concerning the cargo from the party the rule names, which by default is the incoming truck carrier.
The sources don't say what lesser time any approved system has been authorized. Ask the party who runs your filing system.
Canada-bound trucks: at least one hour, carrier and freight forwarder
For Canada, the carrier must give the Agency the information at least 1 hour before the highway conveyance arrives in Canada. "The Agency" is the term the regulation itself uses, and this post keeps it.
A freight forwarder has the same 1 hour deadline for its own shipment data. That means a single crossing can involve more than one filer, and each one has the same 1 hour deadline for its own data.
The carrier duty has exceptions, so not every crossing needs the filing. The regulation says the carrier is not required to give the information in certain listed cases, and this post doesn't list them. Check your own situation against the full text before you assume you're exempt.
The two deadlines side by side
The table sets the two rules next to each other. Every cell comes from the two pages linked above.
| United States | Canada | |
|---|---|---|
| Deadline | No later than 30 minutes or 1 hour before reaching the first US port of arrival; a lesser time may be authorized for the CBP-approved system used | At least 1 hour before the highway conveyance arrives in Canada |
| Who files | The incoming truck carrier by default; the importer or its customs broker may send part, and the carrier sends the rest | The carrier; a freight forwarder for its own shipment data |
| Receiving body | CBP | The Agency, the term the regulation uses |
| Source and date | 19 CFR 123.92, up to date as of 29 October 2026 | Reporting of Imported Goods Regulations, current to 30 September 2026 |
If you file 1 hour ahead, you sit at or beyond the stated minimum on both sides.
What the data looks like, and who can send which part
Both rules ask for details about the truck and the load. The lists below pick out some of the items each text names; they're not the full list.
For the US, the data includes:
- The conveyance number and, if applicable, the equipment number.
- The scheduled date and time of arrival of the truck at the first port of entry in the United States.
- The weight of the cargo, or, for a sealed container, the shipper's declared weight of the cargo.
- A precise cargo description. Generic descriptions such as FAK (freight of all kinds), general cargo and STC (said to contain) are not acceptable.
For Canada, the highway data for the carrier includes:
- The estimated date and time of arrival of the conveyance in Canada.
- The licence plate number of the conveyance and of each trailer, with the country and province or state of issue.
- The seal numbers, if any, for each cargo container on board the conveyance.
The incoming truck carrier must present all required information to CBP in the time and manner the rule prescribes.
The US importer, or its customs broker, may elect to present a portion of the required information. If it does, the carrier is still responsible for presenting the remainder.
That split matters for a dispatcher. If your broker sends part of the filing, you still need to know which items are left for your side, and you should agree that before the truck is loaded rather than at the yard gate.
The cargo description is where a rushed filing is most likely to go wrong, because a vague line costs you nothing to type and the rule says it won't be accepted. Pull the exact wording from the order or the bill of lading, not from a template field that defaults to a generic phrase.
Check your filing steps against your own system before you rely on one deadline
The US text allows a lesser time based on the CBP-approved system, and the Canadian duty has exceptions. Confirm both with your customs broker or the filing system provider.
Then write the answer into your dispatch routine. A short checklist works well:
- Find out which CBP-approved system your US filings go through, and whether a lesser time is authorized for it.
- Find out who files for Canada: your own carrier filing, or a freight forwarder with its own 1 hour deadline.
- List which data items sit in your load record and which have to be pulled from somewhere else, such as seal numbers or the scheduled arrival time.
- Agree with your broker which part of a US filing it sends, if any, and which part stays with you.
Ask your customs broker or filing-system provider which approved system you file through and what its deadline is, then set your own cut-off at least 1 hour before the expected crossing time.
Treat the cut-off as your own buffer; the legal minimums are the ones above. One hour isn't the deadline in every case. The US text allows a lesser time where the approved system authorizes it, and exceptions exist on both sides.
The sources read for this post don't mention penalties, so this post says nothing about them. Check that with your broker too.
Sources
Related service: Logistics and supply chain automation for 3PLs, freight and trucking teams
This post was researched and drafted by AI agents, then checked by a separate AI fact-checker and reviewer before publishing. Every source is linked above.
From data points to pathways.
Book a 1:1 intro call and see how a small AI system could work on the data your operation already has.
Book a call